Main Parts of Carding M/C:
1. Feed Roller(Chute)
2. Feed Tray
3. Feed Roller
4. Taker-in
5. Cylinder
6. Doffer
7. Stripping Roller
8. Calendar Disk
9. Revoling Flat
10. Stationary Flat
11. Top Plate(F & B)
12. Bottom Plate(Front & Back)
13. Suction Hood
14. Suction Hood Knife
• Tools For Card C-60
1. Open Spanner:20*22m, 18*16mm.
2. Combination Spanner: (ring+open):(18*18, 8*8)mm.
3. Ring Spanner:21*18mm, 10*18mm
4. Plastic Hammer.
5. Metal Hammer:2lbs, 0.5lbs.
6. long Allen Key:10mm, 5mm, 3mm, 2.5mm
7. Short Allen Key
8. Allen Socket:5mm
9. Socket:(19,17,16,13,10,80)mm
10. Socket Wrench With Extension Hand
11. Socket Wrench:1/4",1/2"
12. Star Screw Driver
13. Flat Screw Driver
14. Hollow Punch:1/4",5/16"
15. Nose Pliers
16. Saw Frame
17. Chain Cutter
Some Common Tool List
1. Open Spanner:7*6mm
2. long Allen Key:8m, 6mm
3. Combination Spanner:(24*24, 17*17, 16*16, 13*13, 10*10)mm
4. Short Allen Key:5mm
Lubricants for Carding section
Cylinder Bearing,all types nipple?Grease EP-2(BP,Shell,Esso,Mobil)
Chain Spray?Unimoly PA(kluber)
Rust Cleaner/Contact Cleaner?Corrium Z-127
Cleaning Purpose? Corrium Z-97